Sheets (rolls) Energofloor® Compact
Energofloor® Compact is the best decision for floor-heating insulation in premises of multystoried buildings. Polyethylene foam is covered with a massive layer of the aluminum foil, protected from corrosion of chemically resistant polymeric film. Aluminum foil covering 30 micrometers thickness evenly distributes heat from heating elements on all surface of a floor, keeping all advantages of the flexible insulations at installation. Thanks to Energofloor® Compact application on a surface of a floor is created the uniform comfortable temperature, and cement and sand coupler and floor covering are most protected from local overheats and destruction. Thus the small thickness of thermal insulation saves space premises..
|Montage knife Energopro|
|A montage knife Energopro® with a specific sharpening is intended for the insulation cutting. The knife has a special form and dimensions allowing to simplify the work of a professional fitter as much as possible.||Артикул|
|Blade length:||295 mm||ERRKNIFE|
|Damper tape Energofloor®|
|Damper tape Energofloor® is intended for the compensation of thermal expansion of a cement underlayment in floor heating systems. A polyethylene film serves for the prevention of liquid cement solution flowing under the lower edge of the tape.||Article|
|Note:||– if the area of the concrete underlayment is less than 10 m2, a damper tape shall be installed along the perimeter;
– if the area of the concrete underlayment is more than 10 m2, it is recommended to provide for the compensation joint devices.
|Tape-hermetic Energofloor® is intended for the joining and sealing of Energofloor® Compact, Energofloor® Tacker AL, plates Energofloor® without covering insulation joints, prevents flowing of the liquid cement solution between joints of insulating materials.||Article|
|Temperature:||Not below 10°С|
Sheets (rolls) Energofloor®® Compact